ZQ Reducer
Parameters of the ZQ Reducer:
- Specifications: ZQ250, ZQ350, ZQ400, ZQ500, ZQ650, ZQ750, ZQ850, ZQ1000
- Gear Ratios: 8, 10, 12.5, 16, 20, 25, 31.5, 40, 50
- Assembly Types: I, II, III, IV, V, VI, VII, VIII, IX
- Tooth Surface Hardness: ZQ, ZQA
- Non-standard Customization: Custom designs are available. You may provide drawings, and we will manufacture according to the specified dimensions.
ZQ Reducer Overview
- The crane reducer is primarily used in industries such as lifting, mining, general chemicals, textiles, and light industry. Specifically, it is suitable under the following conditions:
- First, the circumferential speed of the gearbox’s gear drive does not exceed 4 meters per second. Additionally, the speed of the gearbox’s high-speed shaft is limited to a maximum of 1500 revolutions per minute.
- Moreover, the gearbox is designed for both forward and reverse operation. When equipped with a backstop, the direction of operation is determined by inspecting the output shaft end.
- Furthermore, the operating temperature of the gearbox ranges from -40°C to +40°C, ensuring versatility in various environments.
- Finally, the gearbox offers nine different gear ratios, nine configuration types, and three types of low-speed shaft ends, providing a wide range of customization options to suit specific application needs.
Dimensions and Assembly Types of the ZQ Reducer
Gear Ratios of the ZQ Reducer
| Nominal transmission ratio | 50 | 40 | 31.5 | 25 | 20 | 16 | 12.5 | 10 | 8 |
| Actual transmission ratio | 48.57 | 40.17 | 31.5 | 23.34 | 20.49 | 15.75 | 12.64 | 10.35 | 8.23 |
Input Power of the ZQ Reducer
Axial Load Capacity of the ZQ Reducer
